Skaqa Ona are intentionally created skacaga ona crafted from the will and kna of the practitioner usually for a specific purpose. In our practice kna is one of, if not the main fundamental construct that allows us to manifest our desires through our intent. Our consciousness, and state of being allows us to mold, and impact the kna around us allowing us to create, and give birth to new entities, and constructs. Skaqa creation is the act of bringing a skaqa into the world through focused kna, intention, and will. Skaqa Ona are pieces of yourself and have sentience like every other piece of existence and feel Pleasure and Pain. They are conscious, self-motivated, self-aware, reasonable, and are capable of communication but they are most of the time subservient to the person who created them.
Every skaqa has a purpose, and it’s your job to pick your purpose for your skaqa. A purpose can be anything. You could want your skaqa to protect you, or your family. You could want your skaqa to help you pass a test. It is important to give your skaqa a purpose. So take time to think of things you would like your skaqa to do for you, once you have your purpose feel free to move on to the next step.
Now you must create an appearance for your skaqa that it will take on a spiritual level. It is important to keep in mind when making your skaqa’s appearance that the appearance should reflect the task that they were assigned to complete. If the skaqa is for better communication with your peers, then it’s appearance shouldn’t be a Azathoth looking creature, but maybe perhaps some type of human or anthropomorphic entity. Besides that the you can create any type of spiritual appearance you would like. Male, female, tall, short it’s up to you. You can even say “screw it, and I’m making this one a shapeshifter”. So have some fun, and do whatever you would like. You also might want to draw a picture, or get some representation of their form once you decide upon it for later steps in the skaqa creation process.
This one’s pretty self-explanatory, and again you can pretty much pick whatever you would like. All we’re going to do is think of some personality traits that you would like your skaqa to have, like charming, intelligent, funny, friendly, loyal, etc. So take some time, and pick out your personality traits that you like, and move on to the next step.
These entities usually release their kna in order to perform their purpose, because of this these entities need to take in kna into themselves in order to feed, so that they can continue to exist. Feeding a skaqa is a lot like charging a sigil, and you can use all the same methods in order to feed a skaqa in the same way you use to charge a sigil. You can also set up some methods of feeding for the skaqa that the skaqa can do on their own behalf. You could tell your skaqa to feed on something like sunlight, or crystals that you have lying around. Skaqas can also be fed simply by giving them attention and placing your awareness upon them, though it is usually a good idea to have other methods of feeding. Not setting up feeding methods, or not feeding your skaqa will result in it going rogue, or it finding its own food sources which may not always be preferable.
Life span should be based on purpose. If you want your skaqa to help you pass a test, then its lifespan should only be until after the test then it will be destroyed. If you wanted your skaqa to protect your property then you would need a lifespan that you can end at any time. So then you would need a phrase, or ritual to end its life when the time comes. This phrase, or ritual would not have to be elaborate. It would just have to be told to the skaqa that once the phrase is spoken, or the ritual is completed they will be destroyed. In my experience skaqa ona only act up once they do not have a purpose anymore, or if acting up is programmed into their nature, or if they are not being fed.
6) The Housing
Now we need housing to ground the skaqa to the physical plane. Housing can be things like a rock, a staff, a doll, something you made out of clay, etc… skaqa ona by nature do not need housing, but it is better to have a physical representation of them for control, and feeding purposes. Housing can be anything, and it is also better to have a housing made, or created by you, and your hands. This is so that the item is more connected to you personally. Once you find what housing you would like to use you are ready to go onto the next step.
This one is super simple all you have to do is pick a name for your skaqa. Literally can be anything meaningful, or otherwise. All you have to do is choose a name.
8) Making a Sigil
Now you should make a sigil out of the name of your skaqa. You will use this sigil as the body of your skaqa. Once you have your sigil you can draw it, or carve it into your housing for your skaqa. This would be recommended, but if you do not want to mark the sigil on the housing you can always put the sigil on a piece of paper, and put it underneath your housing during the “Bringing the skaqa to life” step. The sigil will act as a connection point to the skaqa much like the name, and housing.
9) Bringing the skaqa to life
Now we just bring together all the materials that we have gathered thus far into a ritual. First thing you’ll want to do is cleanse the area. You’re going to want to cleanse the area, set up protection, and center, ground, and call down.
Now you’re going to want to enter an altered state of consciousness where you can strongly in vision the kna that you are manipulating. Close your eyes, and in your mind’s eye begin to mold the kna into the appearance of your skaqa. Strongly visualize every little detail of your skaqa ’s being. Then breathe life into your skaqa by just willing for the kna to be alive and to be conscious.
Once you have molded your kna into the spiritual appearance of your skaqa, then in your head, or out loud call to the skaqa. Tell the skaqa it’s name, it’s purpose, it’s personality, it’s feeding methods, and it’s lifespan. More focus, and will you use to create the skaqa more put together the skaqa will be.
Now your skaqa is done, and it is alive. Undo your protection, and before you send out your skaqa for the task you want them to complete I usually wait one day, and feed my skaqa a couple times. I find when I first create a skaqa it is incredibly weak so I gave it one day to become a little bit stronger before it starts its task.
How to handle a rogue skaqa?
First before we can even handle a rogue skaqa we must determine if it has gone rogue. You can usually tell if a skaqa is going rogue by the way it is acting. This can be things such as it not obeying your commands, orders, or requests, forcibly rewriting its own kna without you telling it to, or doing it yourself, changing its spiritual appearance on its own, it doing stuff outside its character that you gave it, its kna feeling malevolent, or harmful, it trying to hurt you in any shape or form, and probably many others. If your skaqa is showing signs of something like that then it may be going rogue. Rogue skaqa can be quite harmful if left unchecked, and it is your duty as the person who created it, or the person who was watching over it to put it down, or reprogram it.
Reprogramming a rogue skaqa:
If the rogue skaqa is not to far gone, and is not that rogue you can try to enter a meditative state like when you were creating them, and sort of mold them back into the way you originally wanted them to be. After this would also be a good idea to probably feed them, because neglect is one of the main reasons I have seen for why skaqa go rogue. If this works then great, you can continue on with your skaqa as normal, but if not then you’re going to have to destroy them.
Destroying a rogue skaqa:
The process of destroying your skaqa can be brought on for many different reasons from simply being finished with the reason that you created them to them going rogue, and getting out of your control. Knowing how to destroy skaqa ona can be very helpful in these situations and should be something every practitioner that works with skaqa ona should know in case they ever have to go through the process of destroying one of their skaqa ona.
When going through the process of creating your skaqa you are able to program in a kill switch that when triggered will self-destruct your skaqa. These can be incredibly useful in providing a quick, and easy way for your skaqa to be destroyed, if certain parameters are reached that you do not intend, or as a way to clean them up after a certain point after you know you will be done with them. In order to instill these in to your skaqa during the creation process all you have to do is intend them in, much like you would a name, attribute, or personality trait. These kill switches can be set up as specific times, such as giving your skaqa a week after they are created in order to exist, or accomplish their goal, once the time limit is reached they will be terminated. You can also set up your skaqa to have kill switches that are based around specific phrases. These phrases should be something that are usually never utter, so that the skaqa is not accidentally destroyed. These phrases can be literally anything and will usually be programed to only be activated when the creator of the skaqa utters the phrase. You could also use the completing of their objective (if they have one) as a kill switch allowing them to complete their objective then be destroyed, and returned back to the kna they were naturally. One of the more useful for kill switches is to program it to trigger when they go into a roguelike state preventing this roguelike state from causing any problems, or harm. Many of these kill switches can be very useful depending upon what you’re going for, so it is important to select one that would be is inline with your needs.
Items such as the housing, the sigil, artistic representations, or anything else that is connected or represents the must be taken into consideration when going through the destruction process. These things will have to be destroyed as well, or at least cleansed, because they may allow the skaqa to regenerate, and come back from destruction. These items can do this because they hold kna, and some intention of the skaqa, which could facilitate the re-creation. These items may also even accidentally make you recreate the skaqa by reminding you of it which may bring you to refocus on it and give it kna, which may make it possible for it to regenerate back into the world.
After you go through the process of destroying your skaqa you should forget, and not think incessantly about them, so that you do not go through the process of accidentally creating them again. If the skaqa is also known by more than one person, the other person that is not the creator could end up also starting the re-creation process by thinking about it, and accidentally giving that intention kna, so it is also important for them to forget about it, and to not keep it in their mind. This process will be harder the more people know about the skaqa, so well known about skaqa ona may become quite hard to destroy, and that would make intendedly created yamasa ona probably near impossible to destroy that are connected to large groups. This would be because they would be feeding off of the kna, and intentions of those groups, and would simply regenerate, and with so many people as factors it would be very unlikely for them on to go through the forgetting process.
How to destroy a skaqa manually:
1) The first thing you must do is find a quiet position where you will not be disturbed so you can focus on destroying your skaqa. To this spot you should also bring all the things that you have that are connected, or are of the skaqa, so that you will also be able to destroy them. The objective here is to destroy it the same way that you created it.
2) Once you are in this position you should enter an altered state of consciousness so that you will be better connected with the skaqa. Next go through the process of calling your skaqa to you by simply calling out to it, and asking it to appear to you. You may also be able to have a better connection to your skaqa if you are holding or interacting with its housing. Wait for it to appear to you and your mind’s eye so you can begin your interaction.
3) See your skaqa in your mind’s eye as well as you can, then declare to it that you are going to destroy it. This will allow you to get your intention to destroy the thought-form started. once you have declared your intention visualize the skaqa breaking down, and returning back to the kna that it was naturally. See it slowly being destroyed as you will its kna to disperse, and break down. You must see the skaqa being destroyed, and returning its kna to you. Transmuting the kna that you use to create the skaqa back to its original form releasing the skaqa from life.
4) Once you’re done with that know that the skaqa has been destroyed, and that its kna have been recycled into the you. At this point in time is where you would destroy, or cleanse any items that are related, or connected to the thought-form. After that the forgetting process can now begin, and you should go about keeping the skaqa out of your mind to not give kna, and intention back to it. With all that done you can go on your way knowing that your skaqa has been destroyed.